06.32499.0095 Tapered Roller Bearings shacman f2000 f3000 X3000 X5000 X6000 Hande

06.32499.0095 Tapered Roller Bearing 32313B Product DescriptionI. Product Features1. Reasonable structural design, adopting a single-row tapered roller structure. The rollers are in line contact with the raceway, which can effectively disperse the load, adapt to the working conditions of combined radial and axial loads, and is especially good at bearing unidirectional axial loads. During operation, it has low friction resistance, low heat generation and strong operation stability.2. The core components are precision-machined from high-purity bearing steel and undergo strict heat treatment process, with high hardness, strong toughness, excellent wear resistance and impact resistance. It can adapt to harsh working environments with heavy loads and large vibrations, and is not easy to deform or damage.3. Adopting a stamped steel cage, which has a solid structure and light weight. It can evenly separate the rollers, avoid friction and collision between the rollers, reduce wear, and improve the overall operation accuracy of the bearing, extending its service life.4. Detachable design: the inner ring and roller assembly can be installed separately from the outer ring, which is convenient for the installation, disassembly and later maintenance of the equipment, and greatly reduces the maintenance man-hours and difficulty.5. Excellent sealing performance, which can effectively prevent dust, impurities and lubricating oil leakage. It is suitable for dusty and high-load working scenarios such as heavy-duty truck middle axles, ensuring the long-term stable operation of the bearing under complex working conditions.6. Before leaving the factory, it has undergone strict precision testing, load testing and speed calibration, with strong performance consistency, no obvious noise during operation, no jamming phenomenon, and extremely low failure rate.II. Product Specifications1. Model: 06.32499.0095 (corresponding to bearing specification 32313B)2. Bearing Type: Single-row Tapered Roller Bearing3. Core Dimensions: Inner diameter 65mm, outer diameter 140mm, total width 51mm, inner ring width 48mm, outer ring width 39mm, contact angle 20° (metric standard)4. Rated Load: Basic rated dynamic load 305kN, basic rated static load 345kN5. Speed Parameters: Reference speed 3600r/min, limit speed 4800r/min (under the premise of sufficient lubrication and standard installation)6. Applicable Models/Scenarios: Mainly applicable to heavy-duty truck middle axles (such as Delong F3000 and other models), and can also be used in the transmission parts of heavy-duty equipment such as construction machinery, reducers and cranes.7. Material: Bearing steel (high-purity material, strengthened by heat treatment)8. Cage Type: Stamped Steel Cage9. Other Parameters: Cylindrical hole design, no coating, no sealing, net weight about 3.71kg, in line with metric unit system standards.III. Product Advantages1. Outstanding Load-bearing Capacity: The line contact design combined with a reasonable taper structure, the radial and axial load-bearing capacity is far superior to that of deep groove ball bearings of the same specification. It can easily cope with heavy loads, alternating loads and impact loads, adapting to the high-intensity operation needs of heavy-duty trucks.2. High Durability: High-hardness bearing steel material + precision heat treatment process, with excellent wear resistance and fatigue resistance, effectively extending the service life of the bearing, reducing the frequency of equipment shutdown and maintenance, and lowering the use cost.3. Convenient Installation and Maintenance: The detachable structural design allows the installation and replacement of the bearing without disassembling the entire equipment, with high maintenance efficiency, reducing manual maintenance costs and adapting to on-site rapid maintenance needs.4. High Operation Precision: The rollers are closely attached to the raceway, with precise gap control, stable operation without jitter or abnormal noise, which can effectively improve the transmission efficiency of the equipment, reduce component wear, and ensure the overall operation stability of the equipment.5. Strong Versatility: In addition to being suitable for the specified heavy-duty truck middle axles, it can also be widely used in the transmission parts of various heavy-duty mechanical equipment, with wide adaptability, no need for additional customization, and more convenient procurement and replacement.6. Reliable Quality: Produced in strict accordance with industry standards, each bearing has passed factory inspection, with stable performance and low failure rate. It can directly replace the original accessories, ensuring the long-term stable operation of the equipment without frequent replacement.